01-22-2011, 08:58 PM
Join Date: Jul 2010
before low beam
after low beam
sorry the 'before high beam' series did not survive a 'replace battery pack' crisis in the old pocket cam...
but there is obviously a TREMENDOUS difference....
now to go drive the Beastie....
Note on install:
read the posts here.....heed the warnings of how to NOT do it wrong...and follow the manual...it took about35 minutes including hiking around looking for a 10T torx driver....didnt' have one so a 9 took 'em out & an old small flat blade put 'em in...
are a bit odd to work with.....don't quite work as well as the (optimistic owner manual) said, but still did ok....had to use some small pliers to grip & pull 'em out of their little sockets...
but all went well.
There was a tight fit on driver's side wires but it can be done WITHOUT disassembling of other stuff than just the grill and headlight rim screws.
get in--buckle up--hang on
"soothing agricultural implement/personal servant/Walter Mitty multidimensional access utility device conveniently travels on pavement when necessary and often keeps me warm/cool/dry/soothed as needed."