Originally Posted by basecamper
I am getting ready to order the next round of mods which will be an AEV Premuim Bumper and new lighting. I will have two Dually Spots on the windshield wired to the sPOD, two Rallye 4000 Driving lights on the bumper, and will also be doing the Cibie/Rallylights Harness/+80 bulbs mod.
My question is would you tie the driving lights to the harness to come on with the highbeams? Please provide insights as to why or why not.
Also any reason not to have the harness made to accomadate this even if I decede to wire straight to the sPOD?
That is what I will be doing with some IPF 900 driving lights. My harness was built with a high beam take off from the relay.
I would tell Ray at Rallylights to add take off from the relays for high and low beams. It really adds almost nothing to the cost and you will want to have the driving lights triggered by the high beams. Without the take off, you will have to do your own tap anyway. sPod would allow you to turn them off when the high beams were on but why would you want to? You could also wire them with no relay and use a switch so you could turn the driving lights on when your lows were on, but again why?