Jeep Wrangler Forum banner

One Touch Turn Signal Indicating

7K views 24 replies 18 participants last post by  sgpd1sam 
#1 ·
FYI for those who may not know, but on at least the 2017 MY (I have a JUKR Hard Rock) from the factory the vehicle comes with one touch signaling how BMW, MINI, etc have employed for years.

You cannot adjust the amount of indications, however, it's there as a 1-touch alternative to pushing down the stalk completely.

Curious to see if previous model years have this feature. :)
 
#12 ·
Remember the days when we used to have to use the ships whistle!
:beerme:
 
#5 ·
I have it in my 13, mine is a plain jane Sport.
 
#8 ·
I knew about the touch turn signal feature, but didn't know about the auto-start; very nice. My BMW has the one touch turn signal feature, and I was surprised when I found the Jeep has it too.

I'm very impressed with the number of features that are standard on the JK. Mine was a stripper (the ONLY option listed on the window sticker was air conditioning). Yet it has cruise control, digital compass and outside temperature, trip computer, anti-sway technology, eight speaker stereo system, hill-hold braking (prevents it from rolling backward when letting out the clutch on an incline), 4 wheel disk brakes with ABS, etc.
 
#10 ·
That's one of the things I disabled with my programmer.

I like the ability to control the blinker manually.
 
  • Haha
Reactions: mrjimgoodwin
#21 ·
The 3-blink feature doesn't prevent you from controlling them manually.
Well, I guess if you only wanted one blink. Are you trying to wink at other Jeeps? :D
 
#11 ·
I believe I had it on my 2001 TJ as well. It certainly has assisted me in reducing my carbon foot print.

I am happy to only allow it to blink three times at a turn. I have yet had to refill my blinker fluid in the 2015 JKHR!
:iamhappy:
 
#13 ·
My 2015 JKUR has it, but three blinks and a squirt and it's all over. My 2015 Hyundai Sonata also has it, but you can set it for 3, 5 or 7 blinks. I have it set for 5 blinks, which allows for a normal lane change. My 2016 Silverado also has it, but like the Jeep, it's 3 blinks and you can't change it.
 
#18 ·
Driving cross country and am using the one touch a lot. I agree though, 3 blinks isnt enough. Is there a way to mod it so itll do more blinks?


Sent from my iPad using Tapatalk
 
#20 ·
3 blinks is standard. At least in every car I've had that has this feature.
It's just meant for a quick lane change. Hold it like you normally would if you need more.
Once you've begun the lane change and are partway into the other lane, there's no need to continue blinking.
The people around you are lucky you blinked at all.
 
#23 ·
Seriously? Up till this spring I rented like 40 cars a year and everything I ever drove except for a few Hyundais and Kias all did 3 blinks (or nothing at all). It's plenty for a lane change at speed which is what it is. For anything else, just click the damn lever like everyone did since cars had turn signals.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top