Jeep Wrangler Forum banner

Plasma glow switch

3K views 12 replies 9 participants last post by  RAMM241 
#1 · (Edited by Moderator)
Has anybody tried to hook aux lights to plasma glow switch? they come with a 3 cable pigtail and no insructions.. I am hooking KC Pro lights and Piaa back ups..and just not sure what cable goes where? 2014 freedom edition
 
#5 ·
#6 ·

Attachments

#12 ·
+3 on the switch location...did the same for A pillar LED lights.

Easy to find on Amazon as well.

To the OP...I checked my notes on the install...Red came off the fuse panel from a fuse location that got power when the Jeep key is in On (7 I think). Black went to ground and white went to the relay to actuate. And I put a 2.5 amp inline between the fuse box and red line into the switch.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top