I got a set of Rugged Ridge seat covers for Christmas and thought I would share a install tip. I found it to be a P.I.A. to get the bottoms of the seat covers through where the back and bottom of the seat meet, the Velcro wanted to stick to the original cover and it was VERY tight for the buckles for the bottom section as well. I took a pillow case and pulled it through the crack first and let the rest of the case lay in the bottom of the seat then got one corner of the cover through and the rest slid right through. Same for sliding the bottom buckles through. Once I got it all in there I just pulled the pillow case through. I hope this helps someone out.