I have a 2014 Jeep Wrangler Unlimited that I just installed a Smittybilt MOD bumper with a bull bar and full end caps (with lights). The end caps are a nightmare because the lights don't plug into the OEM fog light plugs. Instead it's a complete wiring pain. Has anyone found a better solution to this?
OR is there a driving/fog light that I can mount to the bull bar that plugs into the existing OEM plugs from the OEM bumper/fogs?
The Headlight Revolution will make a jumper for the lights that come with the MOD bumper ends to that it plugs into the OEM wire harness. I just ordered mine today!
I have this setup and you're right you can't tie them into the existing factory fog lights. I ended up removing my KC spot beams and KC driving lamps so I just tied them into that wiring and I was good to go. I just don't use the factory fog light switch because I disconnected it.
I have this setup and you're right you can't tie them into the existing factory fog lights. I ended up removing my KC spot beams and KC driving lamps so I just tied them into that wiring and I was good to go. I just don't use the factory fog light switch because I disconnected it.
Yes I wired the lights that come with the end caps to those lights. I can't for the life of me remember where I got the switches. I stole the idea from someone on this forum.
I have the same set up except with the rock crawler end caps. Mine didn't come with added lights so I just used the stock ones and that worked fine. Your stock fogs won't work on your end caps?
Is the reason you can't wire them, because they are LED? Otherwise, just by a plug with wires attached from inspired engineering. That's how I wired mine up without cutting the factory wires. Inspired Engineering 5202/PSX24W Pig Tail
I attached a link to the inspired engineering one. Ive had it wired and plugged in for over a month now, super simple. Connect red on your fog lights to the red on the connector and same with the black, and plug it into your factory wiring harness. Simple as that, $20.
I have this exact set-up, all I did was take the supplied lights that came with my bumper end caps, cut the OEM fog lights off and then direct wired the existing connection to the new lights. My fog lights come just like any other Jeep.
I got the qtec auxiliary lights, great light, mounted on mod bull bar, plug rt in to factory fog harness.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Jeep Wrangler Forum
9M posts
468K members
Since 2005
A forum community dedicated to Jeep Wrangler owners and enthusiasts. Come join the discussion about reviews, performance, trail riding, gear, suspension, tires, classifieds, troubleshooting, maintenance, for all JL, JT, JK, TJ, YJ, and CJ models!