Originally Posted by chuckr
No, it will still operate, same as it does now. But make sure when you replace the links that you set them to the correct length or you'll cause them to U when you flex.
That just happened to me Saturday.
I should have just manually disconnected my links by pulling the pins and not had to worry about it.
As long as you replace the OEM links to bring the angle of the sway bar back to stock you'll be fine. Ideally you'll go with some quick disconnect links so you don't have to worry about it.
I like to just e-disco when doing light stuff, and I'll now manually disconnect when doing moderate wheeling or harder. I didn't think the course 3 at Jeep Beach would be enough to flex them past their limit.
It sheared off against the drag link when coming back to normal stance.
I had to ride home with the sway bar locked forward.
I have a replacement in transit and should be here Friday. Rock Krawler was outstanding in providing customer service. They didn't even charge me for my mistake.