Originally Posted by Jeepster1228
My initial thought for using the spacers....btw thanks for the pictures that is exactly what I want....
so my thought was when I outfit all the front of the jeep with the bar and winch it will level out the jeep as it is high up at the front and when I install the rear bumper with tire carrier it will probably go down so I was thinking of a 1" spacer in the rear and a 1/2 spacer in the front
I was a nose high when I installed my lift. That was with a front bumper and winch (plus hardtop). Personally I like a little bit if rake it serves a purpose and call me crazy but I think a little bit of rake looks better. So I called tflex and they were happy to send me the rear spacers to correct the issue. (Awesome company)
My suggestion would be install your bumpers then see where your at. It might not drop down as low as you think. Heck I hook a pop-up to mine and the rear barely drops. Depending on your bumper combo u might be able to run a half inch spacer in the back and just leave the front as is. The springs are designed to handle additional weight.