TPMS question - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > JK Jeep Wrangler Forum > JK General Discussion Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 03-18-2012, 07:34 AM   #1
Jeeper
 
CorvusCorax's Avatar
 
Join Date: Jul 2011
Location: Shediac, NB, Can
Posts: 203
TPMS question

Being a newb to these I have a chance to get a set of rims and am wondering
if I can switch them to these rims.


CorvusCorax is offline   Quote
Old 03-18-2012, 07:43 AM   #2
Jeeper

WF Supporting Member
 
kbwwolf's Avatar
 
Join Date: Sep 2011
Location: Wisconsin
Posts: 12,286
You mean your stock TPMS sensors? You should be able to switch em (or the tire shop can do it for you). The sensors are attached to the valve stems on your factory wheels.

__________________


"What we see depends mainly on what we look for."
—John Lubbock
kbwwolf is offline   Quote
Old 03-18-2012, 07:45 AM   #3
Jeeper
 
jplks2play's Avatar
 
Join Date: Jan 2011
Location: goose creek
Posts: 79
What size are the rims? What is the back spacing on them? If the back spacing is 4.5 or lower you should be ok. Also need to make sure the lug pattern is the same.
jplks2play is offline   Quote
Old 03-18-2012, 08:05 AM   #4
Jeeper
 
CorvusCorax's Avatar
 
Join Date: Jul 2011
Location: Shediac, NB, Can
Posts: 203
Quote:
Originally Posted by jplks2play View Post
What size are the rims? What is the back spacing on them? If the back spacing is 4.5 or lower you should be ok. Also need to make sure the lug pattern is the same.
17x9 with 4.5 backspacing ...rims came off of a 2007 wrangler.
Thnx for the replies.
CorvusCorax is offline   Quote
Old 03-18-2012, 11:08 AM   #5
Jeeper
 
jplks2play's Avatar
 
Join Date: Jan 2011
Location: goose creek
Posts: 79
You will be good to go then.
jplks2play is offline   Quote
Old 03-19-2012, 07:19 AM   #6
Jeeper
 
CorvusCorax's Avatar
 
Join Date: Jul 2011
Location: Shediac, NB, Can
Posts: 203
Will 265/70R17 Duratracs work on these rims?
CorvusCorax is offline   Quote
Old 03-19-2012, 07:25 AM   #7
Jeeper
 
Cold's Avatar
 
Join Date: Jan 2012
Location: Tigard, Oregon
Posts: 364
If you are planning on leaving the TPMS from the 2007 you may have issues. I tried swapping the TPMS from a 2008 onto my 2010. APparently there was a frequency change from one year to the next. Now I get to look at the tire warning light until I have the sensors swapped out. But there is no reason the rims wont fit.
__________________
- 2010 JKU Rubicon - 4" Full Traction Long Arm Lift - 37" Nitto Trail Grapplers - 5.38 Gears -
Cold is offline   Quote
Old 03-19-2012, 07:26 AM   #8
Jeeper
 
jplks2play's Avatar
 
Join Date: Jan 2011
Location: goose creek
Posts: 79
Size wise yes might be a little narrow. I had 255/75r17 on my stock and the wheel was a 17x7.5 I'm not sure if the width of the tire will work.
jplks2play is offline   Quote
Old 03-21-2012, 09:08 AM   #9
Jeeper
 
RoobyRoo's Avatar
 
Join Date: Nov 2011
Location: VA
Posts: 187
Images: 2
The wasn't a good reason to use the TPMS sensors at all when I got new wheels since my low pressure alarm was always going off anyway because I never run 35+ PSI and I don't have a Procal (yet). I just left them out on my new wheels because the shop that installed my wheels didn't have the required valve stems in stock and I would have had to go back. So until I get a Procal and can set the pressure to something useful like 25 PSI they are worthless. Maybe I'll just sell them with my stock wheels.
__________________
2012 JKUR Crush Auto
2004 Infiniti G35 Coupe Manual
Life is too short for light beer or diet coke.
RoobyRoo is offline   Quote
Old 03-21-2012, 11:17 AM   #10
ox locker advocate

WF Supporting Member
::WF Moderator::
 
tabber02's Avatar
 
Join Date: Nov 2010
Location: left coast, florida
Posts: 11,943
Quote:
Originally Posted by RoobyRoo View Post
Maybe I'll just sell them with my stock wheels.
honestly that's the best decision... it'll make the deal more appealing and they'll sell faster.

__________________
-bob

2010 JK - Mountain Edition
i spend way too much money on it... that's all


Do you like bacon? I do too, but only supporting members really like bacon, so.... Support the WranglerForum, you spend enough time here! Click here to find out how to become a Supporting Member...


Do it! DO IT NOW!!!!!
tabber02 is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Winch Plate / bumper question ebp123 TJ General Discussion Forum 11 03-18-2012 08:58 PM
Question on my TJ wiseguy52 TJ General Discussion Forum 6 03-18-2012 11:37 AM
Installing Axle Shaft Question stjbg01 TJ General Discussion Forum 5 03-18-2012 08:44 AM
Soft top question DKirk TJ General Discussion Forum 8 03-17-2012 10:56 PM
Question for those with Hemi swaps... TheHighLow JK General Discussion Forum 0 03-17-2012 07:14 PM



Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 03:51 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC