Originally Posted by madax34567
This helps a lot, does anyone have a video/know how to install the lenses in the grill?
In the grill lens - first you unplug the bulb harness with the back - take the whole bulb out while in the harness (it's easier).
There are two clips on the back of the light that snap it in place. If you push in and turn it, the lens and holder come out of the front of the grill.
Take the new lens and slide it in at the angle the old one came out and turn it to lock it in. It works the best to turn it from the back. Once it's in swap the light bulb to the amber one they send with it and put the oem back on it. The reason I use the oem back is that it seals better and has a better gasket.
It should also be noted that the front lens may have some rtv type glue on it, I had to wiggle it around by holding the back until it released and I put some rtv back on the same area of the new one although I think it would hold with no issues.