Originally Posted by angrydad2012
Custom cowl (semi waterproof/cold) air intake for jeep 2.4 2003-2006 SE TJ models
Current setup is a 3inch hole drilled into the rear of the stock airbox witha flex tube to the 3inch howl into the cowl. cut off and sealed front of stock box. Now it works as is but I feel I get hesitation at a dead start in 1st like the air is taking to long or bouncing around in the tube/box.
Any ideas for a straight/curved pipe with a contained filter sort of like the cowl setup for the 4.0's? It will have to pass over the coil pack and make a 90 degree turn or I could move the hole to the left a bit.
I know this isn't what you want to hear, but the stock air box is the ticket
4" BDS springs, zone nitro shocks, rubicon express track bar, Currie tie rod, 1" Rokmen bl, 1" JKS mml, AA Sye/cv conversion, Black Magic Brakes, JKS upper adjustable arms, 4.88 regear, 27 spline chromeolly shafts, 35x12.5x15 GG's on ion's 174, rhino lined tub, boat cannon stereo, rock hard harness bar, Led Windshield Light bar