that artec industries w tj swap is awesome. just put it in mine. well built and fairly easy to install. they put alot of thoght into it.
only thing i would suggest is mount everything like explained, except the shock mounts. i mounted mine where they said, and the shock was too close to the rear. maybe due to the lift?? i had to cut back off and move upwards. if i do it again i will leave those brackets off untill bolt up of rear. bolt the shock in the bracket, and place it where i feel comfortable
imwill definitelly suggest this kit to anyone looking to do the swap!!! and the prce is right to!!
98 Chili Pepper TJ
, 4.0, 5 speed, Smittybily xrc armor. 4 inch lift. 35 Mickey Thompson MTZ. Black Soft 8s. Smittybilt tube fenders. 1 ton steering upgrade. SYE. CV shaft. Adj. Trac Bars front and rear. Adj rear upper control arms. Ford 8.8 rear w/ artec industies truss/tj swap kit. 4.88, Yukon Grizzly locker. Rubi 44 front, w 4.88, Artec Industies truss, Inner c braces, Eaton E-locker, Chrome molly axle shafts. Throttle Body Spacer. Cold air intake. Headers.