I've got this bumper and tire carrier on my 05 carrying a MT 35. I bought the jeep with it already on. The carrier is solid, doesn't bounce or shimmy w/this large of a tire. The bumper is small in height and imo looks kinda whimpy. The receiver is welded at a down- sloping angle which isn't a problem pulling a trailer because the ball allows it to pivot but to carry a receiver mount basket, as far as it sticks out looks STUPID. (I'll have to come up with something different for the set- up.) The rattling is unbareable. I literally took the lever off and threw it as far as I could. I took a short piece of angle iron and attached it to the carrier after drilling and tapping, then Idrilled and tapped a hole in the short sq tubing welded to the bumper and use a small bolt to fasten it.