Jeep Wrangler Forum banner

audio

1K views 6 replies 5 participants last post by  Travis97tj 
#1 ·
ok guys i need some help here i have two 10 inch kicker l7s i want to put in but i cant come up with any designs for a box so they will fit. please help!!!!!!!!!!!!
 
#2 ·
This what I did. The box fits right behind back seat and is higher than the fender wells(the rear hatch seals against it). Two 10s would fit side by side. The outside is covered with black outdoor rubber carpet runner. The box is 3/8" plywood.

Hope that helps.
 

Attachments

#3 ·
Custom Dual 10" Jeep Wrangler YJ &TJ 87-09 Enclosure Box - JEEP2X10
This is similar to the box that I purchased, but mine has Rhino-Lining type stuff on it. It fits good behind the rear seat. I welded a couple pieces of flat strap under my drivers seat to mount the amp to, in case I ever get into a deep water crossing. If I need to take the subs out, then I only need to undo the 2 speaker wires and it is out.
 
#6 ·
i had already bought this box hoping they would fit but the kicker l7s are the square subs and they wont slide in the box. thanks though
Custom Dual 10" Jeep Wrangler YJ &TJ 87-09 Enclosure Box - JEEP2X10
This is similar to the box that I purchased, but mine has Rhino-Lining type stuff on it. It fits good behind the rear seat. I welded a couple pieces of flat strap under my drivers seat to mount the amp to, in case I ever get into a deep water crossing. If I need to take the subs out, then I only need to undo the 2 speaker wires and it is out.
 
#5 ·
my buddy neill barber{#2 in the world in db drag} says the best way to get sound from a vert is to fire the subs down. being he is #2 in the world in that catagorty,he know what he is talking about.check him out on you tube. his blazer will hit 159.2db or something like that. playing music not tones}just saying....lol
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top