Jeep Wrangler Forum banner

Brown Santa

741 views 2 replies 3 participants last post by  Southern 
#1 · (Edited)
I love him. (In a strictly platonic way, of course.)

Got this today...

Metalcloak 3.5" with aluminum arms and OME Nitrocharger shocks. The bumps stops are pretty cool. And it has some nice discos for the front. I did not notice that when I ordered it. I was more concerned about getting both adjustable track bars. Now I have to break loose or drill out a lot of craptacular, old, rusted fasteners.

I will do the SYE/DC shaft/Novak shift cable first. I will also replace the rear pinion seal. Then I have a boat load of parts for the front end that will go on next. If all that works properly then this lift can replace the shot parts I have on there now. I have a 4" lift that sits level. I am betting that this 3.5" kit nets me more than that. My JK 2.5" kit (AEV) got me nearly 4" and I have no winch on the TJ, so I am betting at least 4" rather than the advertised 3.5". We shall see...
 

Attachments

See less See more
4
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top