On my rig I have a Uniden 520xl pro unit, road pro compact speaker, rugged ridge cb TJ bracket, road pro cable, road pro spring bracket, road pro 4' antenna. I have the cable routed through the inner rear right fender grommet. I had to enlarge the hole there on the inner fender to get the connector through the hole, and then cut the stock grommet to insulate the bare sharp metal against the plastic cable. I then routed it through the small space below the tail light, about 1/4" gap. I had to use remove the tail light to get it to fit but the space is almost perfect. Swr is good, top 6" of antenna should be clear when hard top is on.