Jeep Wrangler Forum banner

Coil spring question.

683 views 7 replies 4 participants last post by  logan_tj_ 
#1 ·
I have the teraflex 3in lift on right now and my front end is still lower than the back. Could I buy a front set if Rubicon express 3.5 springs and put those on the front and leave the rear teraflex 3in springs on the back?
 
#2 ·
RE's springs typically give about 1" more height than is advertised so I'd bet their 3.5" springs would be more like 4.5" in reality. If you just need to raise the front by 1/2", I'd just install 1/2" polyurethane spacers on top of the front springs.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top