I ordered a spider gear kit from RYE gears or whatever. Not gonna say it's there fault just yet but any other recommendations to order spider gears from. I bought jeep used so my ignorance is a big part to not know my stuff yet. But comes to conclusion I have a Dana 44 rear. Dynatrac axles with spicer trac-lok. I got used and spiders were demolished. Now I tool out old ones and took clutch plates out. After trying to install all new gears there just not right. Although they are same teeth count. And same heights the angles of the teeth don't size up right. So in return they do not fit in carrier. I couldn't get them in even without clutch plates. Hard to explain but I will try seeing if dynatrac can help. I don't know why I didn't call them in first place but this rye place called me confirmed the axle I had and gearing and all was right. Just size of gears are enough off.
Also I counted 10 teeth on pinion and 50 teeth on ring. That gave me 4.545xxxx gear ratio. So guessing I have 4.56's?