Jeep Wrangler Forum banner

Extreme Terrains Bumpers?

2K views 16 replies 12 participants last post by  happychappy69r 
#1 ·
Does anyone have any experience with these? I'm just wondering if it's a good buy. It'll be my first addition to my 04 tj. Specifically the Barricade Trail Force HD bumper. Thanks a lot!
 
#3 ·
I have the Barricade Front and rear bumpers on my TJ and have no complaints. I've used my Jeep to recover myself and a couple of JKU's with the winch.

The front bumper did take a little effort to get on, there's one lower tab that had to be wallowed out a little but other than that I am extremely happy.



 
#4 ·
I have the Trail Force HD, great bumper for the price. Install required slight reaming of the bottom hole passenger side to line up. I have received numerous compliments on the bumper. I feel it was a great purchase.

Contact XTRyan on this site, he will take care of you.



John
 
#6 ·
I have the Trail Force HD, great bumper for the price. Install required slight reaming of the bottom hole passenger side to line up. I have received numerous compliments on the bumper. I feel it was a great purchase. Contact XTRyan on this site, he will take care of you. http://s284.photobucket.com/user/sn95gt50/media/Jeep Build/IMG_20150513_125721840.jpg.html John
X2. Good value did the trick for me. Ditto on the hole lining up, just took some time to make larger. Don't use he supplied bolts, go to somewhere like Ace Hardware and get a set of Grade 8 bolts instead. If you running fogs you can easily run wires within the bar.

 
#9 ·
You won't be disappointed, XTRyan is great to work with.
 
#16 ·
I picked up a 2" LED light at Autozone and cut out the center of one of my center caps and put the light in there. I drilled a hole through the mounting plate for the tire carrier. Wrapped the wiring in some wire loom and ran it down along the carrier. I used zipties to hold it to the carrier.



Works pretty good.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top