Guys, I am going to take some time and service my fuel injectors on my 2004 Wrangler (6 cylinder w/68,000 miles). I bought some new "o" rings for the injectors and I have already run some injector cleaner through the gas tank a couple of times. I am doing this as part of my routine maintenance since I bought the Jeep last summer. I have a feeling this jeep sat in a garage for a long period of time without running. I have gone through and serviced the diffs, transfer case and tranny. I've flushed the cooling system and changed the thermostat and added a Hi-Flo Thermostat housing from Hesco. I've service the front breaks and bled the lines, replacing the old brake fluid with new. I am now working on the fuel system, inspecting and checing it out as I go. The Jeep is running fine and I don't have any troubles at this time.
Do you guys have any advice or pointers on things I should look for or watch out for as I remove, inspect and clean the injectors? I've never serviced fuel injectors.