I have a stock tj, and I'm trying to install the homemade disco's and the drivers side sway bar link I can unbolt no problem, but I cant unbolt the passenger side link, of corse the Torx bit only fits on the medium size racket. Any tips
Ok took me a minute to figure out what a medium size racket was, but if you can't get enough torque out of your 3/8 dr ratchet, grab a 3/8 to 1/2 in adapter from the autoparts store or WallyWorld. Then you can use a 1/2 in dr ratchet or a breaker bar. Or if you have a small piece of pipe that will slide over the handle to use as a cheater bar. I am guessing that you are just having trouble holding the bolt from turning with the nut.