How High Are You....Would you measure for me? - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ General Discussion Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 09-07-2009, 12:46 AM   #1
Jeeper
 
njkeagle's Avatar
 
Join Date: Mar 2009
Location: Scranton PA
Posts: 607
How High Are You....Would you measure for me?

I forgot to take any measurement when I did my lift about 4 months ago and I would appreciate if you could take the time and measure from where the red dot is on my photo or at the door hinges line would work too . I have a RC 4" lift with TrXus 33's, no BL. I am at about 23 1/2 inches from the rocker guard to the ground. Now there is a small gap of a about an inch under the guard to the actual frame of the Jeep so that would make it 24 or so. The Jeep stock had 30's. I measured a stock with 30's and it was 18" from the same spot. I just want to see what people have. If you have RC even better.

Thanks


__________________
"The world will know, that few stood against many"
njkeagle is offline   Quote
Old 09-07-2009, 05:31 AM   #2
Jeeper
 
TJ01's Avatar
 
Join Date: Jul 2009
Location: The Big Sombrero
Posts: 18
I took before and after measurements. They were taken from nearly the same spot as where your red dot in your photo is. I also have a 4" RC lift. I have Mickey Thompson Baja MTZ's. (33x12.50x15) My before measurement was 18 1/4 inches. My after measurement is 24 1/2 inches. This is measured from the ground to the bottom of the side of the jeep out at the edge.

__________________
01 Wrangler Sport
4" lift
33" tires
SYE
TJ01 is offline   Quote
Old 09-07-2009, 10:58 AM   #3
Jeeper
 
Ironman's Avatar
 
Join Date: May 2009
Location: Clovis, Ca.
Posts: 554
29" for me. 5.5" RE lift with a 1" body lift sitting on 37'S
__________________
'97 TJ--HP Dana 60 rear w/ARB--HP Dana 44 front w/high steer and ARB--5.38 gears--SM465 tranny--RE 5.5 LA kit--4:1 t case--rollin' on 37" MTR's and Allied Beadlocks
Ironman is offline   Quote
Old 09-07-2009, 01:35 PM   #4
Jeeper
 
njkeagle's Avatar
 
Join Date: Mar 2009
Location: Scranton PA
Posts: 607
Quote:
Originally Posted by TJ01 View Post
I took before and after measurements. They were taken from nearly the same spot as where your red dot in your photo is. I also have a 4" RC lift. I have Mickey Thompson Baja MTZ's. (33x12.50x15) My before measurement was 18 1/4 inches. My after measurement is 24 1/2 inches. This is measured from the ground to the bottom of the side of the jeep out at the edge.
Do you have rocker guards? Cause as I said there is a about"1 gap so if yo don't we are bout the same.

Thanks
__________________
"The world will know, that few stood against many"
njkeagle is offline   Quote
Old 09-07-2009, 05:28 PM   #5
Jeeper
 
TJ01's Avatar
 
Join Date: Jul 2009
Location: The Big Sombrero
Posts: 18
I do not have rocker guards, although I would like to get some. So, I would say our measurements are the same for the RC kit with 33x12.50x15's. Your jeep looks great!!! How do your rocker guards attach?
Attached Thumbnails
Click image for larger version

Name:	025.jpg
Views:	3
Size:	97.6 KB
ID:	11145  
__________________
01 Wrangler Sport
4" lift
33" tires
SYE
TJ01 is offline   Quote
Old 09-07-2009, 07:08 PM   #6
Jeeper
 
njkeagle's Avatar
 
Join Date: Mar 2009
Location: Scranton PA
Posts: 607
Quote:
Originally Posted by TJ01 View Post
I do not have rocker guards, although I would like to get some. So, I would say our measurements are the same for the RC kit with 33x12.50x15's. Your jeep looks great!!! How do your rocker guards attach?
Thanks man your's too. You basically drill holes on the side and they wrap under the body and they bolt there as well that's why there is that 1/2 gap cause it's not flat on the body knthe under side. Great protection saved my ass many times.
__________________
"The world will know, that few stood against many"
njkeagle is offline   Quote
Old 09-07-2009, 11:51 PM   #7
Jeeper
 
BLACKTOOTHGRIN's Avatar
 
Join Date: Sep 2008
Location: South Of Heaven
Posts: 1,210
Quote:
Originally Posted by njkeagle View Post
How High Are You....
I'll let you know in a few minutes.....

If I can remeber that long from now.
__________________
"ONE FOOT IN THE GUTTER, ONE FIST IN THE GOLD"
-BLACKTOOTHGRIN
BLACKTOOTHGRIN is offline   Quote
Old 09-08-2009, 12:07 AM   #8
Jeeper
 
njkeagle's Avatar
 
Join Date: Mar 2009
Location: Scranton PA
Posts: 607
Quote:
Originally Posted by BLACKTOOTHGRIN View Post
I'll let you know in a few minutes.....

If I can remeber that long from now.
And I was thinking to skip the"......would you measure?" part but then I thought I would get lots of responses
__________________
"The world will know, that few stood against many"
njkeagle is offline   Quote
Old 09-08-2009, 12:20 AM   #9
Jeeper
 
Rawkon's Avatar
 
Join Date: Apr 2005
Location: fullerton/big bear
Posts: 2,061
Send a message via AIM to Rawkon Send a message via MSN to Rawkon
4ft ....
Rawkon is offline   Quote
Old 09-08-2009, 12:24 AM   #10
Jeeper
 
njkeagle's Avatar
 
Join Date: Mar 2009
Location: Scranton PA
Posts: 607
Quote:
Originally Posted by Rawkon View Post
4ft ....
Thats funny how did you do that consider the road?
__________________
"The world will know, that few stood against many"
njkeagle is offline   Quote
Old 09-08-2009, 12:29 AM   #11
Jeeper
 
njkeagle's Avatar
 
Join Date: Mar 2009
Location: Scranton PA
Posts: 607
I saw your video about the pic on your other post. Sweet!
__________________
"The world will know, that few stood against many"
njkeagle is offline   Quote
Old 09-08-2009, 12:29 AM   #12
Jeeper
 
Rawkon's Avatar
 
Join Date: Apr 2005
Location: fullerton/big bear
Posts: 2,061
Send a message via AIM to Rawkon Send a message via MSN to Rawkon
lol ok give or take a couple inches.
Rawkon is offline   Quote
Old 09-08-2009, 12:05 PM   #13
Jeeper
 
wavebacktothetj's Avatar
 
Join Date: Oct 2008
Location: AL
Posts: 982
im at 24" from my rocker guards with a 4" procomp no BL or spacers

__________________
Dpg offroad ultimate kit- OME/JKS on 35's the rest is in my profile
wavebacktothetj is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
High Beam Problems Blackyj YJ Tech Forum 5 03-11-2013 09:10 PM
Up Armor(TM) High Clearance Skid Plates - IN STOCK! dave@rokmen Classifieds Archive 2 07-01-2009 12:19 AM
1997 Wrangler SE Problems - Mechanic Estimates Seem High? scleme1 TJ Tech Forum 5 07-20-2007 02:21 PM
4.0L vrs 4.0L high output dav1587usa YJ Tech Forum 0 05-01-2007 02:41 PM
High Speed Chase in a Wrangler?? SportsGal501 General Jeep Discussion 6 11-23-2006 09:37 PM



Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 12:00 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC