if you put on a 2 inch lift"coil spacers"should you drop the transfer case? - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ General Discussion Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 10-02-2009, 03:47 AM   #1
Newb
 
gotjeep1997's Avatar
 
Join Date: Sep 2009
Location: Southern suburbs of the greater chicagoland area
Posts: 6
if you put on a 2 inch lift"coil spacers"should you drop the transfer case?

This is the deal. I have a 97 wrangler and i just bought rough country 9000's for my jeep and when i got those they are suppose to be for a 0-1.5'' lift applications. I put the drivers front shock (new one) on and I noticed it is a inch and a half larger then the stock ones and now there is only about 3 inchs of travel (with the new one on)before it bottoms out. I was under the impression you needed at least whatever the distance between the bump stop and the axel(stock height),which i think is about 6 inchs. my problem is i dont wana add more then 2 inchs of lift on it and i was thinking of putting the coil spring spacers and bump stops on it. I noticed that some of the kits have spacers to drop the transfer case .a few places said that if you dont there will be a vibration and also driveshaft issues? I also wanted to know if the steering linking will be ok stock,brake lines will have to be moved, and the linkage for the shifters will be ok. i would assume just the spacers ,bump stops, and transfer case mount would have to be dropped but just wana make sure and not run into any other issues.Also anyone know on the windshield the drivers side under the bracket there is a peice that the mounting bolts screw into is in the windshield frame. it is held into place by some kinda peice behind it and both of my mounting bolts broke in there and the peice fell into the windshield frame and cant seem to get to it now. now in order to fasten the windshild to the bracket that i can think of is weld some threded sleves into the holes if i cant get the peice out. any help would be great. thanks

gotjeep1997 is offline   Quote Quick Reply
Old 10-02-2009, 04:03 AM   #2
Jeeper
 
Joe Dirt's Avatar
 
Join Date: Mar 2007
Location: Murrieta, CA
Posts: 1,076
With a 2" spacer lift the only things you need are the spacers and 2" longer shocks. It's not tall enough to drop the T-case. 3" and up you will start to get some vibes and need to drop the T-case or get a SYE. I ran a 2" spacer lift with 31's for years. It works fine for trail running.

__________________
2013 Wrangler 2D, 3.6L, Automatic, 3.73 Gears, Limited slip in the rear, Teraflex 2" lift, 285/75/16 tires, LOD bumper & 8K winch, 2M Ham radio.

People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf- George Orwell
Joe Dirt is offline   Quote Quick Reply
Old 10-02-2009, 04:05 AM   #3
Jeeper
 
csamn2007's Avatar
 
Join Date: Aug 2009
Location: Peterson AFB CO
Posts: 1,911
Send a message via AIM to csamn2007
Are you talking a total lift of about 3inches?
__________________
2000 Wrangler Sport
2 in Procomp SL 1 in BL
33 in Procomp MTs
csamn2007 is offline   Quote Quick Reply
Old 10-02-2009, 04:12 AM   #4
Newb
 
gotjeep1997's Avatar
 
Join Date: Sep 2009
Location: Southern suburbs of the greater chicagoland area
Posts: 6
total lift of 2 inchs on suspension
gotjeep1997 is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How much transfer case drop do I need. BARKDOG67 TJ Tech Forum 24 05-05-2014 08:12 PM
Transfer case drop without a lift?? Covrace YJ Tech Forum 1 07-13-2009 08:35 PM
mml vs transfer case drop activelydying TJ Tech Forum 14 04-08-2007 04:10 PM
Transfer case drop jherrin215 TJ Tech Forum 5 01-23-2007 01:09 PM
transfer case drop install upinar TJ Tech Forum 5 01-23-2007 12:38 PM



Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 11:22 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC