For those of you who want eyelids for your jeep, My friend has come up with a way to do it without paints, tape, or sloppy tint paint. This method is clean and easy to take off if you don't want them anymore.
My friend decided to use a rubber material, almost something a plunger is made out of. He then cut it at work to fit his lights with ease.
I then unscrewed the 3 screws that hold the chrome housing for the headlight with a t15 bit.
I then took the rubber piece and gently fit it around the lip of the housing until it was snug.
put chrome housing back on and tighten with 3 screws and you're all set.