I recently installed a NP241 transfer case in my '98 TJ and love it, with the exception of the lack of a speedometer. Below i have attached two images of my case installed. The top one looking at it from behind, the bottom from the front. The final picture is one that i found on the forums. It shows a 241J on the left, with a speed sensor output in a similar location to the stock 231 on the right.
As you can see, the output shaft on mine is different, and does not include the output for the speed sensor. I am looking for a way that i can build or wire a sensor into my harness. Is there a different output for this style case that I am missing, or do i need to engineer a system that will produce a similar output to the stock sensor?
Has anyone else run into a similar issue?
Thanks in advance!