Hey im new to this but this forum has helped me out on alot of things. but this baffles me.
I just put on a rough country 3.25" lift and 32x11.5 tires on stock rims on my jeep. after relocating the traction bar and reinforcing the new hole with some grade 8 washer welded on and doing the 1" transfer case drop to remove the drive line vibration.
I took it for a test drive on my way to work. everything was fine till i tried accelerating on the on ramp for the highways. I was at a deast stop, got up to about 20 Mph and then it was almost as if i let off the gass and got back on. it got to the point i couldnt get it over 5 mph. then it went away. but if i got on the gass anymore than babying it, same problem. not sure if this is because of the lift or some underlieing problem.