Originally Posted by GoldenSahara00
Are your studs for tcase mount through the skid? You should have had your transmission supported at the bell housing while the skid was off. If you didn't then it probably lowered so your fine then.
thanks golden, yes when the skid was off it was supported by the bell housing. The 4 nuts are on but when i bolt the frame bolts in, it lifts up the transmission.
Like I had the skid on a hydraulic jack and was supported by that while i was trying to get it on. I then put the bolts in the right side frame and went to do the left and couldnt without jacking the skid up more.