OME springs question - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ General Discussion Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 09-05-2012, 11:58 AM   #1
Jeeper
 
Tonycrd's Avatar
 
Join Date: Oct 2011
Location: Spain
Posts: 548
OME springs question

Ok, so I got this used set of 933/942 springs.

I noticed that one spring is shorter then the other. I already figured out that the longer front one goes on the drivers side and the longer rear one on the passanger side.

But..the rear springs have a difference in hight of about an inch..is that normal?

__________________
'98 TJ 2.5 - 2,5" lift - 31"s on Pro-Comps
'02 KJ 2.5 - 3" lift - 245's on Moabs - Diesel
Tonycrd is offline   Quote Quick Reply
Old 09-05-2012, 12:01 PM   #2
Jeeper
 
Wench's Avatar
 
Join Date: May 2010
Location: Lincolnton, NC
Posts: 475
Send a message via AIM to Wench
shorter one goes on the side where the rear trac bar connects to the frame (passenger side) only guessing though...

__________________
You can lock it..even put a different t/c in it..but its still not a RUBICON!
Wench is offline   Quote Quick Reply
Old 09-05-2012, 12:07 PM   #3
Jeeper
 
Tjmike003's Avatar
 
Join Date: Feb 2012
Posts: 102
Quote:
Originally Posted by Wench
shorter one goes on the side where the rear trac bar connects to the frame (passenger side) only guessing though...
That doesn't sound right.
Tjmike003 is offline   Quote Quick Reply
Old 09-05-2012, 12:10 PM   #4
Jeeper
 
Tjmike003's Avatar
 
Join Date: Feb 2012
Posts: 102
Quote:
Originally Posted by Tonycrd
Ok, so I got this used set of 933/942 springs.

I noticed that one spring is shorter then the other. I already figured out that the longer front one goes on the drivers side and the longer rear one on the passanger side.

But..the rear springs have a difference in hight of about an inch..is that normal?
I would think this is not normal. When you get springs for a specific amount of lift they are all going to be the same.
Tjmike003 is offline   Quote Quick Reply
Old 09-05-2012, 12:30 PM   #5
Jeeper
 
Wench's Avatar
 
Join Date: May 2010
Location: Lincolnton, NC
Posts: 475
Send a message via AIM to Wench
Quote:
Originally Posted by Tjmike003 View Post
That doesn't sound right.
when lifted from stock, the jeep will "slightly" lean towards the passenger side because the trac bar will pull the frame down a LITTLE...but not much at all...then again they could have F!@#ed up the order...like i said..im just guessin...
__________________
You can lock it..even put a different t/c in it..but its still not a RUBICON!
Wench is offline   Quote Quick Reply
Old 09-05-2012, 12:39 PM   #6
Jeeper
 
timmysixgun's Avatar
 
Join Date: Jun 2012
Location: South East PA (Not Philly)
Posts: 95
Im in the same situation. I called arb about the same thing. They told me the longer ones go on the driver side unless you have a bumper with tire carrier that swings on the passenger side. In that case the longer rear one goes on the passenger side.
timmysixgun is offline   Quote Quick Reply
Old 09-05-2012, 01:10 PM   #7
Jeeper
 
Join Date: Oct 2011
Posts: 1,527
Quote:
Originally Posted by Tjmike003 View Post
I would think this is not normal. When you get springs for a specific amount of lift they are all going to be the same.
No so with OME.

See A/B Fitment here:
http://arbusa.wordpress.com/2011/02/...fitting-guide/
tangofox007 is offline   Quote Quick Reply
Old 09-05-2012, 01:15 PM   #8
Jeeper
 
Join Date: Oct 2011
Posts: 1,527
Quote:
Originally Posted by Wench View Post
when lifted from stock, the jeep will "slightly" lean towards the passenger side because the trac bar will pull the frame down a LITTLE...
Resetting the track bar bushings to the "new" normal ride height should totally eliminate that issue.
tangofox007 is offline   Quote Quick Reply
Old 09-06-2012, 07:02 AM   #9
Jeeper
 
Tonycrd's Avatar
 
Join Date: Oct 2011
Location: Spain
Posts: 548
I have a relocator on the rear trackbar..

Anyway, can anyone confirm there is that much difference in spring hight on the rear springs?
__________________
'98 TJ 2.5 - 2,5" lift - 31"s on Pro-Comps
'02 KJ 2.5 - 3" lift - 245's on Moabs - Diesel
Tonycrd is offline   Quote Quick Reply
Old 09-07-2012, 04:53 AM   #10
Jeeper
 
Tonycrd's Avatar
 
Join Date: Oct 2011
Location: Spain
Posts: 548
anyone?

__________________
'98 TJ 2.5 - 2,5" lift - 31"s on Pro-Comps
'02 KJ 2.5 - 3" lift - 245's on Moabs - Diesel
Tonycrd is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 12:58 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC