Originally Posted by Moroney167
Are those allen heads gonna be fun to get off or what. Set nuts or how are the threads in there. Just to knw I dont break to much taking it apart.
They're Torx bolts, not allen heads.
My mirror brackets had some naaasty kind of aluminum corrosion going on when I bought my Jeep.
I popped them off, used a wire wheel to scuff them, clean them, then spray painted them, and they look great still, nearly 6 months later.
Prep well, primer, then use your preference of finishing choices.
If you Herculine them, make sure you cover the mounting surface well, as you mentioned. If you get any on that part, you can wipe it up quick while it's wet, or use steel wool, or a green scrubber pad to clean it off that part after it dries.