Hey guys, I have a 2006 Wrangler X with a little over 55000 miles. About 500 miles ago i started getting this not so much as a rattle but a grinding sound with a slight vibration as a came to a stop. It only happens when i am going less than 10 mph and only happens for a brief second or two. It also happens when i am in gear going around slow turns left and right slowly, also at less than 10 mph. I had read that the noise could be due to bad u joints or sway bar and also bad exhaust manifold. But i checked u joints, sway bar, exhaust manifold and i can not find the source of the noise. I just replaced the clutch pre maturely because i had ppl tell me it was the throwout bearing. This noise is driving me crazy! Please help!