Jeep Wrangler Forum banner

Possible to run 35 1250s on stock wheels 05 wrangler sport

1K views 7 replies 6 participants last post by  Sb5551 
#1 ·
Hey guys I plan to get the 3.5 re base kit and a 1.25 body lift. I dont see why this wouldnt clear 35's I dont rock crawl or anything so not a lot of flex in the first place. Just mud for me. My only question is will the 1250's fit on stock wheels. I heard you can only fit 1050s but just want to make sure.

Thanks
 
#2 ·
depends on the stock wheels.. how wide are they? 8" would be good. However your going to get some major rubbing when turning.
 
#4 ·
back space for 12.50s on 15x8 rim about 3.75 is what I recall mine where.
 
#7 ·
Ill try to get pix ya its the aluminum ones they kind of look like the ravine wheels. but with lines in them. I heard the backspacing is like 5 or something crazy but if it will only rub a lil then screw it lol. I figure a 1.25 body lift will help with that. since a 4 claims to clear 35's
 
#8 ·
The lack of backspacing is what is causing the rubbing the body lift wont help with that. Once we see pictures of the wheels we can tell if it will take that wheel. It is almost better just to get some rockcrawler rims. They cost about 50 dollars a piece. If you by the wheel and tire from the same place and they mount and balance them you'll actually save more money then having a store do it for you.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top