Jeep Wrangler Forum banner

ProComp Lift: anything to worry about

865 views 8 replies 7 participants last post by  Marcwakefield22 
#1 ·
Hi all, my LJ already has what appears to be a procomp lift (wish i knew, but no idea what size, but it does have 35's). I understand that these lifts are on the more undesirable side of the fence, but is there anything that I should really be concerned with? Anything I should replace now before bigger problems down the road? I do like to wheel, but mostly mud/trails no rock climbing. Hoping those with experience with this lift can help out. Thanks in advance for the feedback!
 
#4 ·
Depends on what "level" it was and lift height. If it was the basic springs and shocks then there isn't anything to worry about. The shocks are valved very stiff for a TJ though so replacing those can improve ride quality.

Likely though if you've got 35s it's a larger lift that came with other components. In that case I'd start replacing everything but the springs.
 
#7 ·
The fixed lower control arms have poly bushings. Don't be surprised if they cause your lower control arm brackets to tear from the axle housing like mine did (happened before I bought it.....I removed the kit).









oh, if you have that trackbar bracket like you see above.....get rid of it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top