Well, my TJ started leaking a couple fluids so I decided to take it out of service and do some upgrades. I found a cheap Griffin aluminum radiator on ebay, so I'm replacing the radiator and water pump.
I also decided to change the power steering pump because it was leaking. I purchased a PSC pump kit and man is it impressive. I am however having an issue with the resevoir mounitng bracket. I didn't get any instructions with the kit and am going off info on the forums. I assume the braket is in the correct location by the master cylinder. However when I try to get the resevoir in the bracket the resevoir hits the evap canister.
Has anyone had as similar issue with an easy fix?