02-21-2016, 08:49 AM
Mostly old school..!
5-Year WF Supporting Member
Join Date: Mar 2011
Location: Now searching for rocks in Sumner, TX
Originally Posted by AMGEEP
sorry to bring this old post up but i just purchased a new set of rear LED lights for my 2002 TJ.
Can someone please guide me, there are 4 wires on the TJ, but only 3 wires on the new LED lights.
I connected the reverse light, blinkers, and driving lights, BUT the brake light wire im not sure where to connect it.. please help.
I tried to connect it to driving lights but when i signal left or right its not working. basicly I think im missing an additional LEDS on these rear tail lights, am i right ? it appears its only got reverse lights, blinkers and driving lights(blinkers use the driving lights but as brighter)
any ideas ???
There are is no separate
brake light/turn signal wires on a TJ. The same wire is used for both brake and turn signal. Black/yellow=tail lights, dark green/red=left turn/brake, brown/red=right turn/brake.
violet/black=back up lights.
Since you only have three wires in your light fixture (and one must be a ground unless it's grounded through it's base) you must not have a reverse light in the fixture.
Knowing what type of light fixture you're using would help.