I was trying yesterday to remove my grill to insert the wire mesh bhind it like mentioned in the JK thread. I got all the bolts off and the radiator removed but I still have a problem. There are AC lines the run through the panel right in front of the raditor. I can not remove the grill because of these lines. I also can't remove the panel. Any ideas.
" Some people never go crazy. What truly horrible lives they must lead." Bukowski
I can't get to the inside of the grill because of the panel that the AC lines run through.
unbolt the shroud, unbolt and remove the radiator, unbolt the a/c condensor but do NOT undo any of the hoses on the condensor, tilt the "driver-side" of the condensor towards the motor just enough so that you can get whatever you need through. thats what I did to install my electric fan (click for picture) which was about 4" thick