Hey ya'll, I got my new rock sliders delivered the other day and they're at the powder coaters right now. They came with the hardware that mounts them to the side of the tub (underneath the door) but no hardware for attaching to the underside of the body, I took my stock Rubi sliders off the other day and the holes that are drilled on the new sliders are pretty much a perfect match to the threaded inserts that are already on the underside that were used for the stock sliders - so it's pretty clear that that's how they'll be mounted. I was at Autozone today to pick up some hardware to use on the underside, I kind of stopped in my tracks because I didn't think it was right to use regular bolts where the bolt head would be sticking out, vulnerable to being mangled or sheared off while going over rocks. So my question is... do most people just use regular bolts? Or how about some sort of lower profile rounded head on a bolt? Countersunk is kind of out of the question because the holes aren't machined for those. My other small problem is that the original threaded holes I'll be using aren't considerable in size, so most likely I'll have to use washers or somehow find something with an extra wide head. Sorry for the long read.