Jeep Wrangler Forum banner

Rough Country 4" lift problem

2K views 7 replies 6 participants last post by  02Prove 
#1 ·
I had a local 4x4 shop install a 4" rough country lift on an '02 sahara 4.0L. Approx 2000 miles later the lower suspension arms on all for wheels are slipping at the mounting bolts. They are torqued properly and greased. I am afraid the bolts sliding back and forth will slot the holes on the mounting brackets or the bolts will fail.
Has anyone else encountered this problem and what are some ideas on how to correct the issue.

Tom
 
#6 ·
Your making me nervous, thats the kit I just ordered.
 
#8 ·
x2

I've heard bad things about letting some 4WD shops install your stuff. I would call in favors and try to get help doing it yourself. If you have a Jeep club in your area I would post up asking for help. Most Jeepers will be glad to for free beer and pizza. :D
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top