Rpm fluttering - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ General Discussion Forum

Join Wrangler Forum Today



Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 07-06-2011, 01:29 AM   #1
Jeeper
 
Explorer_of_the_Void's Avatar
 
Join Date: Oct 2010
Posts: 59
Explorer_of_the_Void is on a distinguished road
Rpm fluttering

Every time I put my Wrangler in neutral as I'm coasting to a stop sign, the rpms flutter up and down by about 2-300. I was wondering if there is some issue there
Explorer_of_the_Void is offline   Quote
Old 07-06-2011, 03:56 AM   #2
Jeeper
 
TJ-Q8's Avatar
 
Join Date: Aug 2010
Location: Kuwait
Posts: 583
TJ-Q8 is on a distinguished road
Quote:
Originally Posted by Explorer_of_the_Void
Every time I put my Wrangler in neutral as I'm coasting to a stop sign, the rpms flutter up and down by about 2-300. I was wondering if there is some issue there
I had the same thing. And 4 days ago i had a bent head soo when i fixed tht thw manifold was off and we cleanned ot off with the throttle body. Now tge rpm is stable. Soo i would guess that probably your throttle body need a clean.

__________________
2001 Jeep Wranlger Tj (Maroon)
1985 K35 going through restoration (LS swap)
LS swapped 350z competition drift vehicle
e36 track vehicle (LS swap)
1985 Caprice coupe (soon to be drag car)
06 ccsb Chevy HD (daily driver)
TJ-Q8 is offline   Quote
Old 07-06-2011, 04:14 AM   #3
Jeep Ninja

WF Supporting Member
 
scgeek12's Avatar
 
Join Date: Feb 2011
Location: Norfolk VA
Posts: 1,827
scgeek12 is on a distinguished road
try cleaning your IAC, very easy and cheap

easiest way to do it-

1- take the 4 10MM bolts out of the throttle body (yellow arrows)
2- unplug the 3 sensors from the throttle body (TPS, IAC, MAP)
3- take the 4 torx screws out holding the IAC to the throttle body (red arrows)
4-take the 2 torx scres out holding the IAC together (purple arrow) (theres a tiny gasket in there be carful with it and reuse it)
5- take an old tooth brush and some thottle body cleaner from any auto parts store and clean the housing (blue arrow) and plunger (brown arrow) well
6- open the butterfly valve ( green arrow) on the throttle body and clean all of it out as well with the same stuff
7- put it all back together and enjoy your nice idle







__________________
"if it aint broke, fix it till' it is!"
my build- http://www.wranglerforum.com/f5/scge...ad-117592.html
scgeek12 is offline   Quote
Old 07-06-2011, 06:39 AM   #4
WF Moderator

WF Supporting Member
::WF Moderator::
 
kjeeper10's Avatar
 
Join Date: Feb 2011
Location: Connecticut
Posts: 51,938
kjeeper10 is on a distinguished road
Quote:
Originally Posted by scgeek12
try cleaning your IAC, very easy and cheap

easiest way to do it-

1- take the 4 10MM bolts out of the throttle body (yellow arrows)
2- unplug the 3 sensors from the throttle body (TPS, IAC, MAP)
3- take the 4 torx screws out holding the IAC to the throttle body (red arrows)
4-take the 2 torx scres out holding the IAC together (purple arrow) (theres a tiny gasket in there be carful with it and reuse it)
5- take an old tooth brush and some thottle body cleaner from any auto parts store and clean the housing (blue arrow) and plunger (brown arrow) well
6- open the butterfly valve ( green arrow) on the throttle body and clean all of it out as well with the same stuff
7- put it all back together and enjoy your nice idle
^^ this and/or a vacuum leak
kjeeper10 is offline   Quote
Old 07-07-2011, 12:10 AM   #5
Jeeper
 
Explorer_of_the_Void's Avatar
 
Join Date: Oct 2010
Posts: 59
Explorer_of_the_Void is on a distinguished road
Thank you Jeepers, I'm going to fix it!
Explorer_of_the_Void is offline   Quote
Old 07-07-2011, 03:19 AM   #6
Jeeper
 
2004_Silver_Sport's Avatar
 
Join Date: Jan 2011
Location: Owasso, OK
Posts: 811
2004_Silver_Sport is on a distinguished road
I'm having an idle problem too. I've cleaned everything possible and I can't find a loose or cracked vacuum line. Is there a diagram somewhere showing all the vacuum lines so I can check and see if I missed one?
__________________
04 Sport with 3" Savvy Front Springs, 2" Rear BDS Springs, 1.25" BL, 1" MML, 33" Cooper STT's, Currie TJJ Front Track Bar, RE Quick Discos, and other junk.
2004_Silver_Sport is offline   Quote
Old 07-07-2011, 10:03 AM   #7
Jeep Ninja

WF Supporting Member
 
scgeek12's Avatar
 
Join Date: Feb 2011
Location: Norfolk VA
Posts: 1,827
scgeek12 is on a distinguished road
Quote:
Originally Posted by 2004_Silver_Sport View Post
I'm having an idle problem too. I've cleaned everything possible and I can't find a loose or cracked vacuum line. Is there a diagram somewhere showing all the vacuum lines so I can check and see if I missed one?
any CEL? the only vacuum line that isnt really easy to see is the little 90 deg. elbow at the bottom of the MAP sensor which can cause false MAP readings and can mess with the idle a bit
__________________
"if it aint broke, fix it till' it is!"
my build- http://www.wranglerforum.com/f5/scge...ad-117592.html
scgeek12 is offline   Quote
Old 07-07-2011, 02:30 PM   #8
Jeeper
 
2004_Silver_Sport's Avatar
 
Join Date: Jan 2011
Location: Owasso, OK
Posts: 811
2004_Silver_Sport is on a distinguished road
Nope my CEL isn't on
__________________
04 Sport with 3" Savvy Front Springs, 2" Rear BDS Springs, 1.25" BL, 1" MML, 33" Cooper STT's, Currie TJJ Front Track Bar, RE Quick Discos, and other junk.
2004_Silver_Sport is offline   Quote
Old 07-07-2011, 03:07 PM   #9
Jeep Ninja

WF Supporting Member
 
scgeek12's Avatar
 
Join Date: Feb 2011
Location: Norfolk VA
Posts: 1,827
scgeek12 is on a distinguished road
Quote:
Originally Posted by 2004_Silver_Sport View Post
Nope my CEL isn't on
hmm id still check the elbow just to be sure but id imagine it would toss a CEL for it, just pull the MAP sensor off and its right at the bottom of it and connects it to the throttle body, mine was cracked and noone around me had one in stock so i just put a dab of RTV on it, hasnt leaked since

__________________
"if it aint broke, fix it till' it is!"
my build- http://www.wranglerforum.com/f5/scge...ad-117592.html
scgeek12 is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 07:13 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner