ok i have two jeeps... a blue 97, with 410 gears, and a green 97 with 307 gears.
i swapped the axles over, so now the blue one have 307s and the green has 410s.
i went to go swap the speedo gear. what do you know. the plugs are different... so then i look on here find out that the gears remove out of the sensor.
finaly getting the sensor and gear out of the green truck(the gear ment for 307) realise the gear is not staying in the sensor... either way i take it out. and go to put it in the blue jeep that now has the 307s. gear clicks in bolt it on. speedo does not work...
go to the the gear (meant for 410s) in the green jeep. i cannot get the sensor to go in strieght...
so i said F%$k it and put the speedo gears back into the trucks they came from even tho they are not set up for the new ratios..
the blue jeep with 307s that has a speedo gear for 410s work just not accurate as before. BUT!! the green jeep that now has the 410 gears but has the speed gear for a 307 does not work. it is in strieght, and all the way, and now engine light is on for speed gear..