Materials used: 2- 2 3/8 chainlink tension clamps, 2-3" carriage bolts, 2 nylon locknuts, 4- 1 1/4 fender washers, 2- #8 rubber plugs, 2 locknuts, 2 wingnuts
Had to drill hole in clamp to tighten it up a bit. Used 1/4" bolt. Then tigtened carriage bolt with locknut (pic 1&2). Slid on fender washer and rubber plug (had to drill hole in center of plug to slide over bolt/ pic 3&4).Ended up cutting a small piece of 3/8" fuel line to go in hole on jack where bolts go thru.Slid jack in place put on fender washers,lock washers and wing nuts. As you can see in last pic I ended up taking jack base off and just stored it by my fire ext. Almost forgot, got all the material at Lowes. Hope this helps!
03' Freedom edition, 4.0, 5 speed, 4" zone lift, D30, Superior D35 with detroit locker, 4:56 gears, 33x12.5 bigfoot xt, 15x8 eagle alloys
God created all men equal, then a few of us became firefighters