Originally Posted by AOR
Front 1.0 - 3.5" Lift 2.5" Johnny Joint OE Rubber Bushing JKSOGS126
- Vehicles with Dana 44 front axle (or Dana 30 with aftermarket differential cover) and less than 3" of lift may require bump stop adjustment to prevent interference with differential cover.
PM me if you are interested in this one.
the JKS #126 requires 2-2.5" bumpstop extension to clear the tie-rod or diff cover....depending what generation you get.
tested at full bump.
needs 1-3/8" bumpstop extension to clear the tie-rod, and required hacking half the face off the "SOLI" diff cover.
and here's the old JKS #126 hitting a Riddler diff cover, requiring about ~3-3.5" of bumpstop extension, yea thats right...~1" less uptravel than stock.