Well im right now in the jeep tech center here in my city (chihuahua mex) i came here because my front DS is hitting my Exhaust and we couldn't find an answer to that problem engine mounts are good exhaust is perfectly normal and all the measurements are in the factory spot.
So the technician told me well the only thing im notice is that your jeep is way low Way Way lower than the factory specs.
We measure the jeep and its 1.5 inches lower !!!!!!
And he is telling me that that is the answer hahaha we dont know what to do meanwhile im gonna cut my exhaust in the y pipe and bend that part to make more clearance. XS
And now the weird stuff i also order an alignment job to my jeep because my steering wheel was slightly pointing at 2o clock.
So the WEIRD stuff to me was the measurements they took
Front left camber - 0.25'
Front right camber -0.42' is this normal is way different than the other one???
Front left caster 6'21'
Front right caster 6'10' another difference i know its not much but can be something bad???
Front left toe 0'12'
Front right toe 0'10 again!!!
Front total toe 0'22'
Left camber and right camber -0'28'
Left toe 0'05'
Right toe 0'15' wow thats to much isn't??? Even if this is a solid axle? Or maybe normal?
Total toe 0'20'
Rear axle pointing at -0'05
This are the actual numbers
The jeep drives normal and straight
But I'm kinda worried about my front axle numbers that could be something bad going on there??
Thanks a lot for taking the time to answer