Jeep Wrangler Forum banner

Winch Plate To Fit

800 views 5 replies 3 participants last post by  Damen94 
#1 ·
I'm wanting to buy a winch but i'm wondering what kind of winch plate i would need to put it on. Would i need to buy a custom one or just buy one?
 

Attachments

See less See more
1
#4 ·
Any winch plate you buy will bolt to the top three bolts on each side of the framerail where the stock bumper bolts in and the front bolt of the swaybar bushings.... the only thing you need to consider is if you need a raised winch plate for fairlead clearance on your bumper. If not a flate winch plate will work. From the look of your bumper, a flat winch plate might be just fine.
 
#5 ·
It looks like a regular winch plate will work, however, and I'm not sure about this, but I'm not sure if a winch will fit in the area between your bumper and your grille. It looks a bit tight in there. You might have to loose your lights too.

But I am by no means an expert, those are just my thoughts.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top