Did you have to run wheel spacers with the stock wheels and those tires?
Good call getting rid of the milk jugs up front. I ended up cutting the bent ends off my stock front bumper at an angle when I still had it. It will look much better, and help going over stuff.
Yup I am running a set of 1.5" Spider spacers, real nice and should hold up just fine. The bumper was bent up when I bought it and is on the way out, picked up a rock bumper on e-bay, should be here on Wednesday so I'll update the pictures then !
The tires are the Goodyear MT/R Kevlar's, 33 x 12.5 and they fit just fine on the 15x8 Ravine wheels.
x2 Looks Great! Let us know how it drives (after the alignment of course). Did you end up running a SYE and new DS?
For right now I have the Transfer drop on it, I plan to add the SYE and a CV Drive shaft at some point. Just too many things I want to add and little funds. I want to re gear it for starters but I want to find a D44 for the front then add some ARB Lockers. That will most likely be next year. I still need to add bumpers and a winch for this year...