Jeep Wrangler Forum banner

1993 YJ 4.0 tranny swap

810 views 2 replies 2 participants last post by  Jesse93yj4.0 
#1 ·
I have a dakota ax 15 im wanting to swap into my 93 yj mine needs rebuilt. I have seen alot of post about people talking about doing it but has anyone actually swapped one in. Let me know what problems you ran into.
 
#2 ·
I believe that the Dakota clocking ring is wrong, just like the XJ's are. Either replace the back half with your clocking ring or drill 6 new holes in it to clock the t-case up where yours is now. Other than that it is the same trans and bolt pattern to the motor.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top