I have just purchased a 93 Jeep Wrangler and took it out 4 wheeling for the first time yesterday. I put the jeep in 4 wheel low and it did great in the mud. However, when I was finished I proceeded to put the jeep back in to two wheel high, but the 4 wheel drive light doesn't go out. The lever seems to be in the correct position, I can pull it back to what seems 4 wheel high and put the jeep in gear and it will move. I can put it in neutral and it of course want move. The thing is I can't tell that it drives any different in what appears to be 4 wheel high than what appears to be 2 wheel high. The shifter will not move any more forward than where it is. I am perplexed.