Jeep Wrangler Forum banner

hockey puck body lift

6K views 7 replies 4 participants last post by  SmacYJ 
#1 ·
Anyone done this?
 
#6 ·
I used the hockey pucks when I replaced mine on my 91. They are still holding strong at the scrap yard today. The key to a good hockey puck presentation is you need two hole saws. Trim the over all diameter down before you drill the center hole. This makes them look more like a professional body lift. Then make your center hole. I used oversized washers the same diameter as the hockey puck. It looked clean and professional. I wish I had some pics. I am working on using some hockey pucks for my transfer case drop kit until I get my sye. When I finish it I will post some picks so you guys can see.
 
#7 ·
Cool. I look forward to seeing the pics. I took another look at my bushings yesterday while I was spraying things down to prepare for Saturday. They weren't as bad as I originally thought the other day. The bushings under the frame mounts are all crushed. The ones under the tub aren't that bad. Kinda weird.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top