Jeep Wrangler Forum banner

Switch-pros sp-8100

4K views 13 replies 7 participants last post by  arjeeper 
#1 ·
Just thought I'd post a few pictures of my switch-pro sp-8100 that I installed a few weeks ago. I can't say enough good things about the people at switch-pros best and friendliest customer service ever. I also had the chance to talk with them at the 2015 sema show just as friendly in person. Also the sp-8100 is very nice and pretty easy to install. I've since installed one more in a friends Jeep.
 

Attachments

See less See more
5
#2 ·
Here's a few pics of my rigid lights that the sp-8100 is controlling. I don't have the reverse light hooked up yet, I'll post pics of them once I get them installed.
 

Attachments

#5 ·
It comes with a sheet of decals and there are a few that just say aux. But there is no way to turn off the back lighting individually. The a-pillar cover is from rugged ridge it was intended for 4 individual rockers switches, but it comes out just about right for the sp-8100.
 
#10 ·
I uesd 3m double sided tape that Is used for body moldings/emblems I stacked 3 pieces on each end where the mounting hole is in the switch, 3 pieces stacked also helps to make it level in the panel, then I used permatex black silicone adhesive all the around the edges and let it cure for a couple of days. The switch doesn't require much pressure to activate either.
 
#14 ·
This looks fantastic. I'd love the same but don't know if I have the skill to make it look as good!

Wish they'd come out with a pre-molded unit for the Switch Pros in vertical.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top