MoTown TJ Build Begun... - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Build Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 07-05-2012, 10:39 AM   #1
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
MoTown TJ Build Begun...

I bought a 2000 TJ I6 Auto...originally from Texas -- not a spot of rust anywhere!

I will be doing a few mods to it... suspension lift, tires/wheels, interior, flares, front and rear bumpers, lighting and more.

Started off by gutting the interior and prepping for spray-on liner. Went with Al's Liner and just applied the base coat which is their heat and noise reducer. Plan on spraying main product later today.









dobermin is offline   Quote Quick Reply
Old 07-06-2012, 07:39 AM   #2
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
1st Coat of Al's Liner Spray-on bed liner blasted on...

First coat of Al's Liner sprayed on last night....a lot of fun to apply.. 2nd coat coming this evening....


dobermin is offline   Quote Quick Reply
Old 07-06-2012, 08:03 AM   #3
Jeeper
 
homebrwd's Avatar
 
Join Date: Mar 2011
Location: Ashburn, VA
Posts: 1,085
Looks good, I recently picked up an 04 from Texas, outside of the dust that is EVERYWHERE the Jeep is also rust free. GL with yours, hoping to bedline mine in the next couple weeks!
homebrwd is offline   Quote Quick Reply
Old 07-06-2012, 08:57 AM   #4
Jeeper
 
Join Date: Jul 2011
Location: San Diego, CA
Posts: 824
nice!!!
__________________
04 TJ Sport (Stolen)
05 LJ Sport "My build"
htkrph is offline   Quote Quick Reply
Old 07-06-2012, 06:25 PM   #5
Jeeper
 
DBoat's Avatar
 
Join Date: Jul 2012
Location: The Big D
Posts: 1,545
Dober, I like the way you think..

Dana
DBoat is offline   Quote Quick Reply
Old 07-09-2012, 02:09 PM   #6
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
Liner Complete!

I finished the Al's Liner this weekend and put the interior back together... It turned out sweet if I do say so myself... I love that product.... and it's a blast to use. I'd spray my family room floor if she'd let me....

Here are some more pix:



dobermin is offline   Quote Quick Reply
Old 07-09-2012, 02:47 PM   #7
Jeeper
 
BigDeaner's Avatar
 
Join Date: Mar 2012
Location: Boston
Posts: 592
What kind of brush cup is that in the first picture?
__________________
'99 TJ Chili Pepper Red SOLD
'13 JKU Rubicon Billet SOLD
BigDeaner is offline   Quote Quick Reply
Old 07-09-2012, 05:59 PM   #8
Jeeper
 
Join Date: Apr 2012
Posts: 304
Quote:
Originally Posted by BigDeaner View Post
What kind of brush cup is that in the first picture?
I was just about to ask that. Havent found anything yet that I thought would work well on a drill short of a wire wheel and I dont want to take it down that far all over.
rjacobs is offline   Quote Quick Reply
Old 07-09-2012, 06:04 PM   #9
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
It's a nylon bristle 4" brush from ALsLiner.com -- it made very fast work of the prepping...
dobermin is offline   Quote Quick Reply
Old 07-09-2012, 06:41 PM   #10
Jeeper
 
BigDeaner's Avatar
 
Join Date: Mar 2012
Location: Boston
Posts: 592
Quote:
Originally Posted by dobermin View Post
It's a nylon bristle 4" brush from ALsLiner.com -- it made very fast work of the prepping...
From what I heard, it can take upwards of 3 hours to hand sand. This product right here is the first thing I'm buying when I line my tub.

Thanks!

Any issues getting the seats and console out? I've heard a break bar can come in handy.
__________________
'99 TJ Chili Pepper Red SOLD
'13 JKU Rubicon Billet SOLD
BigDeaner is offline   Quote Quick Reply
Old 07-15-2012, 07:45 PM   #11
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
This weekend I installed the Rugged Ridge CB Antennae mount. This worked very well, and is a very solid mount.

dobermin is offline   Quote Quick Reply
Old 07-15-2012, 07:47 PM   #12
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
I also started the in-dash CB (full size) install. I plan on replacing the factory radio with the CB (other plans for radio)...

It's going to fit...

dobermin is offline   Quote Quick Reply
Old 07-24-2012, 01:24 PM   #13
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
Skyjacker 4" Lift Completed

I completed the suspension lift -- adjustable front & rear lower control arms (pretty beefy); springs, shocks, etc... also replaced tie rods, drag link and track bar...



I had researched death wobble, and experiened it immediately after lifting (prior to alignment thou) -- I learned that a large percentage of the problem is slop or "egging" out of the hole for the track bar mount to the axle. I examined this whole, which was new since the kit said I had to move it over 3/4" and drill a 7/16" hole -- this hole was way to big.. tons of slop.. so I had to weld a plate over it drill a more snug hole... alignement done and all working very nicely so far.






dobermin is offline   Quote Quick Reply
Old 07-25-2012, 12:35 AM   #14
Newb
 
Nickg's Avatar
 
Join Date: Jun 2012
Location: Manhattan KS
Posts: 38
Images: 12
i love your wheel/tire combo could you please give me some specs on them. build looks good aswell!
__________________
97 TJ-3" BDS,1" BL,1" MML,3/4" front spacer,superwinch,33x12.5" BFG At,15x10 soft 8's
Nickg is offline   Quote Quick Reply
Old 07-25-2012, 07:14 AM   #15
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
The wheels are MHT Fuel Off Road series 15x8 with 3.75 backspacing.

The rubber are Interco Tire Super Swamper M16's - 33x13

Thank you.
dobermin is offline   Quote Quick Reply
Old 07-25-2012, 04:26 PM   #16
Newb
 
Nickg's Avatar
 
Join Date: Jun 2012
Location: Manhattan KS
Posts: 38
Images: 12
thanks for the info!
__________________
97 TJ-3" BDS,1" BL,1" MML,3/4" front spacer,superwinch,33x12.5" BFG At,15x10 soft 8's
Nickg is offline   Quote Quick Reply
Old 08-01-2012, 08:39 AM   #17
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
Rear Rampage Bumper Install

I installed a Rampage Rear bumper last night. I was impressed with the metal thickness; quality of construction; powder coating and design.

The install was near effortless if I didn't opt to drill four additional holes (over & above the factory holes) for added security. This bumper has a built in 2" hitch and I plan on doing some towing. It also has two 4" round slots for some fogs....

dobermin is offline   Quote Quick Reply
Old 08-06-2012, 09:25 AM   #18
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
Not a lover of chrome - painted the headlight bezels

I roughed them up with sandpaper; and hit them with Rustoleum Hammered Black -- so far, so good...

dobermin is offline   Quote Quick Reply
Old 08-27-2012, 03:29 PM   #19
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
Installed Team Xenon Fender Flares

I replaced the factory fender flares with some 6" ones form Team Xenon. Very quick and easy install... nice tough that the front flares make use of the factory side marker lighting...

dobermin is offline   Quote Quick Reply
Old 09-11-2012, 03:36 PM   #20
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
CB Mounting - Arizona Rocky Road and EtipInc.com ET-850 Slide Lock

I ended up mounting a Cobra CB which I obtained from the one and only Joanne's CB Shop (Joannescb.com) to an overhead bar from Arizona Rocky Road. This bar runs from drivers to passenger side and you would normally screw the CB bracket to it and off you go. I wanted more security so I obtained a radio mount from EtipInc.com - ET-850 Slide Lock - which is usually used for mounting police type radios to a center console, etc. The ET-850 is great because it locks and looks great as well. I ended up mounting it inverted; welding it to the Arizona Rocky Road mounting bar and then adding a small piece of steel reinforcement along the top which removed all the wobble while on rough terrain. I am absolutely thrilled with the end results... both the Arizona Rocky Road bar and the Etip ET-850 Slide Lock are great products and are a great solution for mounting and securing a CB in a Wrangler. JoAnneCB.com are one of the last remaining CB shops in the country that do all kinds of great things with radios -- very knowledgable folks and JoAnne is a sweet heart...



dobermin is offline   Quote Quick Reply
Old 09-14-2012, 09:26 AM   #21
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
KC HiLites Installed

We ordered a bunch of KC HiLites products and are very impressed with not only the quality, but the completeness of the kit. The wiring harness that comes with these lights is awesome - includes inline fuses, the relay setup and more. This past week we installed two 4" round fog lights in both the front and rear Rampage Products recovery bumpers and also installed three rectangular KC's on the hood. A few weeks ago we installed two 6" KC's on the bumper stinger and simply used the factory fog light wiring/switch.

For this latest install, I ended up digging into the power distribution center under the hood. Here I was able to utilize an existing relay "socket" that was not being used and also found room to fit the two additional relays (used the one on the KC harness) with in the PDC box. I ran a distribution post under the hood for both the positive and negative battery terminals where I tied in all the necessary connections.

We moved the radio to a Tuffy Security Products center console which freed up the stock location to mount accessory switches. We used the Tuffy Security Products Stereo Dash Cutout Cover which we drilled for the illuminated toggle switches we purchased at Radio Shack. We are very pleased with the end results.


dobermin is offline   Quote Quick Reply
Old 09-25-2012, 10:27 AM   #22
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
Police Style Spot Light Installed

Just recently installed a police style a-pillar mounted spot light... these are very handy and I highly recommend them for any outdoorsman..

dobermin is offline   Quote Quick Reply
Old 09-28-2012, 05:49 PM   #23
Jeeper
 
Join Date: Feb 2012
Posts: 37
Quote:
Originally Posted by dobermin View Post
Just recently installed a police style a-pillar mounted spot light... these are very handy and I highly recommend them for any outdoorsman..

If I may ask, what website or company did you purchase this exact search light? its perfect for what I am looking for in my willys edition tj! If you could send me a link to a website or point me in the right direction that would be very helpful!! Thanks!
TourGuide is offline   Quote Quick Reply
Old 10-12-2012, 07:15 AM   #24
Jeeper
 
Join Date: Jun 2012
Posts: 31
Images: 21
TourGuide, I apologize for the delay in response-- This is a "real" police spot light made by Unity. But don't buy them direct, you will pay too much. I purchased mine through a police supply store called Priority One Emergency

Ask for Patrick and let him know that Paul from Livonia sent you and he may knock off a couple bucks...

dobermin is offline   Quote Quick Reply
Reply

Tags
bedliner , rampage bumper

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 03:31 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC