Jeep Wrangler Forum banner

Upgrading my Suspension on 1999 TJ Wrangler Sport 4.0L

1K views 4 replies 4 participants last post by  Clutch 
#1 ·
1999 TJ Wrangler Sport 4.0L engine Dana 30 front 3.73 and Dana M35 Rear. 152600 miles, with a 3.5 body lift kit on 33" tires and wheels.

I am getting ready to do a major suppression upgrade with the following:
RE7203M 3.5 TJ LONG ARM EXTREME DUTY
ADV 50-7906 NP T/C FIXED YOKE KIT
EXP 4042 TJ CV DRIVE SHAFT 4 TO 6in
SYN 4120 D30/44 HD BALL JOINT SYSTEM

So my question to the forum members is there anything I'm missing or should be prepared for that may not in my plan...

Any input would be greatly appreciated....
 
#2 ·
Doubt you have a 3.5" body lift, but ok. I would ditch the body lift and get a 1.25" body lift. Are you planning to run larger tires than 33's? If not, I would put a 2.5" suspension lift kit, 1.25" body lift, skip the SYE and driveshaft all together, and save a bunch of money. Rubicon Express are not very high quality parts IMHO. Just my $0.02
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top